metallic, insulated tool such as a toothpick or wooden pencil.
4. The display should flash 12:00 am.
Setting Current Day & Time:
1. Push Setup/PGM once, date will appear on screen.
2. Push the + or - to move the arrow under the current day of the week (S, M, T,
W, T, F, S). Press enter to confirm. See Figure 5. Hour will appear on screen.
3. Push the + or - to scroll through the Hours. Press enter when the correct
hour is found, minutes will appear on screen. Press the + or - to scroll
through the minutes. Press enter when the correct minute is found to
confirm setting. Be sure (AM/PM) is correct. This is located in the lower left
portion of the display.
Programming On/Off Events: (up to 4 ON/OFF program)
1. Push "Setup/PGM" twice. "P1" will flash on screen.
2. Push + or - to choose the desired program to change, or start at "P1 ON."
Push enter to confirm which program P1, P2, P3, or P4 you are setting.
3. Push + or - to choose between "set" or "del" program. Push enter to confirm.
4. Push + or - to choose the desired days you would like the timer to activate.
The options are;
• S, M, T, W, Th, F, S (All days)
• S, S (Weekend)
• M, T, W, Th, F (Weekdays)
• M through S: (Individual days)
Push enter to confirm the days of week setting.
5. Push + or - to choose the desired hour. Push enter to confirm.
6. Push + or - to choose the desired minute. Push enter to confirm.
7. After completion of steps 1 to 6 the ON time and days selected are
complete. Repeat steps 4 to 6 to set the OFF time for the program.
8. Once ON and OFF for a program is chosen the timer will ask you to "save"
- push enter to save program, then continue to set other programs. When
finished programming push Setup.
Note: The display will show "AUTO" to alert you a program is running.
*When done programming, close door. You cannot exit during a program cycle.
Using Random Feature: The random feature will turn lights on and off using
the programmed times + or - 30 minutes. This gives your house a more lived in
appearance.
1. Push the random button to activate random feature. The screen will change
from "AUTO" to random. Screen will display "RDM"
2. Push the auto button to deactivate random mode. Screen will display "AUTO"
120VAC 60Hz
Incandescent (Tungsten): 5A/600W
Resistive: 15A/600W
Maximum Temperature: 40°C
Manual Override:
Manual override will not effect programing.
Pressing the door will override the timer
setting and will manually turn the switch ON
Memory Back Up: This timer is equipped
with memory back up that will protect the
settings for up to 60 minutes. You never have
to replace batteries. The internal backup
requires about 12 hours to fully charge.
ON - OFF Slide Switch: Turns power to the
timer ON or OFF. In "OFF" position timer will
not function manually or automatically.
ON = Power to timer & fixture.
OFF = No power to timer or fixture.
For normal operation leave in the on
www.jascoproducts.com
Digital timer (2 pages)
Digital timer (2 pages)
Indoor/plug-in digital timer (2 pages)
Digital time switch (3 pages)
Digital timer (2 pages)
Digital timer (2 pages)
Wireless timer system (2 pages)
Digital timer (2 pages)
Digital time switch (3 pages)
Indoor & outdoor timer (2 pages)